soft seat DIN gate valve

soft seat DIN gate valve: 1. size: 1-1/2"~24"; 2. non-rising stem design; 3. soft seated;

soft seat DIN gate valve :

1. size: 1-1/2"~24";2. non-rising stem design;3. soft seated ;4. Temp range: 80~120 degree;

5. available pressure:  150lb;

6. feature: 

♦ Special protective surface finished by shot-blasting and internal and external 

electro-statically applied epoxy resin. Full bore, without cavity, without sediment impurity.

♦ Resilient seat enables positive tight shut-off with no trapped debris, minimum head-loss, long lasting seal and accurate wedge guiding.

                                                                                

♦ Ductile iron core fully vulcanized with EPDM or NBR rubber with integral stem nut of dezincification resistant brass.  Bonnet gasket is in groove between body and bonnet.

♦ Valve body cast precisely and its accurate geometric dimensions makes sure of its seal  without any precise processing .

♦ Cast ductile body increases impact resistance and improve pressure performance. All external bolts are stainless  steel for antirust.

7. certificate:             

soft seat DIN gate valve